Free DFM Review Within 24 Hours

✓ Manufacturability Review

✓ Cost Reduction Suggestions

No obligation

Upload Your Drawing And Receive

✓ Tolerance Risk Analysis

✓ Material Alternatives

CNC Machined Male to Male Threaded Elbow Fitting, 90° Cone Seat Hydraulic Nipple

Description

Product Overview

This CNC machined male to male threaded elbow fitting is a precision 90° right-angle hydraulic adapter built for high-pressure fluid transfer systems. It features dual male threaded ends and a 74° cone seat sealing profile following SAE J514 standards, manufactured under our professional CNC machining services. The square wrench body delivers stable clamping torque during installation to prevent thread deformation and leakage. Custom thread specifications, sizes, materials and surface finishes are available for OEM & ODM orders.

Our CNC machining services produce this hydraulic fitting with tight control on thread geometry, cone seat surface finish and intersecting internal flow channel. It is widely used to redirect hydraulic tubing without flow restriction, solving layout conflicts in compact hydraulic assemblies.

CNC Machining Service Parameters Table

表格

Parameter Item Specification
Product Name Male to Male Threaded Elbow Fitting, 90° Cone Seat Hydraulic Adapter
Machining Service CNC Turning + CNC Milling + Drilling + Threading
Standard Compliance SAE J514 (JIC 74° cone seat), custom DIN / BSP / NPT / Metric threads supported
Thread Type UNF, NPT, BSPP, BSPT, Metric thread (customizable)
Angle Accuracy 90° ±0.05°
Surface Roughness Cone sealing seat: Ra ≤0.8 μm; Thread zone: Ra ≤1.6 μm; Non-critical surface: Ra ≤3.2 μm
Flow Channel Intersected cross bore, burr-free internal passage
Surface Treatment Zinc plating, nickel plating, passivation, black oxide, as-machined
MOQ 1 pc for prototype; 50 pcs for mass production
Inspection CMM, thread gauge, cone seat gauge, pressure test report available
Lead Time Prototype: 3–7 working days; Mass production: 10–18 working days

Material Analysis

We offer multiple metal options for this CNC machined elbow fitting; material selection depends on working pressure, medium and environment:

  1. Carbon Steel (1018 / 12L14) Cost-effective, high rigidity, good resistance to installation torque deformation. Suitable for standard hydraulic oil circuits, general industrial machinery, construction equipment. Usually finished with zinc-nickel plating for rust protection.
  2. 304 / 316L Stainless Steel Excellent corrosion resistance for water-glycol, chemical fluid, offshore, marine and high-humidity environments. Note: stainless steel easily work-hardens and threads may gall; we adopt optimized cutting parameters and thread lubrication process.
  3. Brass (C36000) Great machinability, low galling risk, suitable for low-pressure pneumatic, water and light fluid transfer. Not recommended for high-pressure heavy hydraulic systems.
  4. 6061-T6 Aluminum Lightweight, good for low-pressure lubrication circuits, mobile equipment where weight saving is required. Lower pressure rating than steel.

Tolerance Capability

  • Critical sealing cone seat: ±0.005 mm
  • Thread pitch diameter: Controlled within thread class 2A / 3A (per thread standard)
  • Intersecting bore position tolerance: ±0.02 mm
  • Outer square body dimension: ±0.03 mm
  • Overall length: ±0.05 mm

We only apply ultra-tight tolerance on sealing and thread zones; non-functional surfaces use standard tolerance to balance cost and performance, which is a core advantage of our CNC machining service.

Manufacturing Difficulties

  1. 90° cross intersecting deep hole deburring Two perpendicular internal flow channels create sharp crossing edges. Residual micro burrs will detach under fluid impact and cause valve blockage or seal damage. We use precision cross-hole deburring + ultrasonic cleaning.
  2. Cone seat profile & surface finish control The 74° cone seat is the core leak-proof surface. Minor tool chatter or feed marks will lead to hydraulic leakage under cyclic pressure. We use form tools and final polishing for sealing cone.
  3. Dual male thread concentricity and angle consistency The two male thread axes must maintain strict 90° perpendicularity. Fixture error and tool deflection can cause angle drift, leading to assembly stress and seal failure.
  4. Thread galling prevention Especially for stainless steel. Improper cutting speed or chip control creates torn thread flanks, which seize during assembly.
  5. Torque balance on square wrench body Square body must be coaxial with the thread shank; offset will generate side load during tightening and damage the cone seat.

Application Scenarios

  • Hydraulic power units, hydraulic manifolds, valve block connection
  • Construction machinery, agricultural equipment, forklift, injection molding machine
  • Lubrication centralized oil supply systems
  • Offshore and marine hydraulic pipelines (stainless steel version)
  • Custom test benches, fluid transfer equipment, automation pneumatic & hydraulic stations
  • Compact equipment where tubing must turn 90 degrees in limited installation space

FAQ

Q1: Can you customize non-standard thread sizes or special angles other than 90°? A: Yes. Our CNC machining service supports custom thread specification, custom bore diameter, 45° / 60° / custom elbow angles. Send your drawing or sample for quotation.

Q2: What is the maximum working pressure of this male to male threaded elbow fitting? A: Pressure rating depends on material, thread size and cone seat quality. Carbon steel JIC 74° cone fittings commonly support up to 4000 psi; stainless steel versions can reach matched pressure rating with proper processing. We can provide burst pressure test report on request.

Q3: Is this fitting reusable after disassembly? A: The 74° cone seat is a metal-to-metal hard seal. If the cone surface is not scratched or damaged, it can be reused. Scratches on the cone seat will cause leakage and replacement is required.

Q4: What inspection documents can you provide? A: We can supply material certification, CMM inspection report, thread gauge inspection record, pressure test certificate and dimension inspection sheet for batch orders.

Q5: What is the difference between this JIC cone seat fitting and ordinary pipe thread elbow? A: This is metal cone hard seal for high-pressure hydraulic service. Ordinary NPT pipe thread fittings rely on thread sealant and are mostly for low-pressure plumbing. They are not interchangeable for high-pressure hydraulic systems.

Q6: Can you provide surface treatment such as nickel plating or black oxide? A: Yes, zinc plating, bright nickel plating, black oxide, passivation and PTFE coating are available.

Reviews

There are no reviews yet.

Be the first to review “CNC Machined Male to Male Threaded Elbow Fitting, 90° Cone Seat Hydraulic Nipple”